industrial insulation specialists
 |
| HOT INSULATION |
| Equipment or pipework with an operation temperature greater than 55°C in case of metallic surfaces and 65°C in the case of non-metallic surfaces should be insulated so that the surface temperature after insulation (cold surface temperature) does not exceed 55°C. |
 |
| COLD INSULATION |
| Cold insulation should be considered where operating temperatures are below ambient and where protection is required against heat gain, condensation or freezing. |
 |
| AEROPINK CEILING INSULATION |
| Cold insulation should be considered where operating temperatures are below ambient and where protection is required against heat gain, condensation or freezing. |
 |
| INDUSTRIAL HEAT LOSS |
| Factors affecting heat transfer and thermal performance through fibrous materials occur in a combination of the following three mechanisms... |